SpaceLYnk/HomeLYnk/Wiser for KNX
All the information relating to Schneiders KNX smart controller offerings.
For Group Addresses to be accessible they need to be have the "Export" option checked in the Configurator portal. Select Objects from the top ba...
Thu, 29 Nov, 2018 at 8:48 AM
The Port that is set in the portal is the Port that you have forwarded from your Modem. You must to forward the internal port to 443. For more informati...
Thu, 29 Nov, 2018 at 8:28 AM
To use the HomeLYnk/SpaceLYnk, you need to have Remote Services enabled from the Configrator. To do this; first enter your HomeLYnk or SpaceLYnks local ...
Fri, 18 Jan, 2019 at 4:11 PM
It has been found that if the Gateway Address is not configured properly then Port Forwarding will not work on SpaceLYnk/HomeLYnk devices. Ensure that t...
Thu, 29 Nov, 2018 at 8:49 AM
SpaceLYnk, HomeLYnk/Wiser for KNX are local systems; as such, they require local port forwarding and a static external IP address or DNS entry. eg spacelynk...
Thu, 29 Nov, 2018 at 8:53 AM